ErgottWheels

I have some ideas on a nice and light rim tape.

Going to rebuild with a DT BR710, my personal bike.

My finish work is better than new. #flawless

My favorite since it came out. Nothing else goes on on my chains.

Cleanup after today's double header

Once again, presta nuts to the rescue.

Sport utility bike

All in a days work @ Manorville Hills County Park

Going to try some trail maintenance

My current workspace

#blackouttuesday

FS: some rim brake, alloy wheels Here's a set for you. Boyd Altamont Lite rims Wheels Mfg hubs... Sapim Laser spokes with Wheelsmith DB 14 spokes rear/drive side alloy nipples rim tape 24 front/28 rear SOLD These wheels are about 1450g and brand new. I ran out of tape for the front wheel, but more is already on the way. It's green powdercoat masking tape if you must know, I'm a big fan of the stuff. The hubs are the legendary Alchemy UL after production was handed over to Wheels Manufacturing. This is 100% post recall, these hubs were not only corrected, they far outlasted any other hub in the ISO test (I forget the exact number) they needed to pass and confidently put them back into production. The test is more punishing than anything you will put them through I'm sure of that. It's still my favorite design ever and I personally run 3 different sets of wheels with them. I have local riders on them continuing to put them through the paces. I have no reservations about them at all, wish they were still in production. These are excellent wheels for all but the biggest riders. I think up to 200lbs is a fair estimate depending on how much you break wheels. PS - I have a couple more sets of the hubs ready to build if you have another rim in mind.

Cleaning some bikes

@fse.bike new gravel/cross rim, the G28/32X Lightweight rim laced to @carbon_ti X-Hub SP hubs. 1300g light and strong race wheels