Fairbanks Lumber Co

Measured meticulously in inches and cut according to width and length, dimensional lumber that is rough cut is the best for building and home framing. The most common cuts are "two by four" although there are also one, three and four by four cuts, as well as larger sized customized cuts.

Buy extra lumber to allow yourself enough to work with. Rough boards will need to be trimmed and polished to remove knots and smooth the grain.

Cypress lumber often has a descriptive name that highlights a distinctive characteristic. Color names refer to the dominant shade found in the heartwood, while names like lowland cypress are applied to trees grown in low-lying marshes and swamps.

Your first impulse when working with rough-cut lumber might be to flatten as large a board as possible, but that’s not always the best choice. Cutting boards into smaller pieces before you mill can let you see just how much warp is in the boards.

Dimensional lumber has nominal and actual measurements. The nominal measurement is the width and thickness when the item is still green. The Actual measurement is the width and thickness are the product's measurements once it has dried.

Before you decide to use a more expensive finished lumber that only somewhat meets your dimension requirements, consider the time sensitivity of the project. If you have time before you plan to start, rough-cut cypress could give you a higher degree of dimensional accuracy.

When you’re working on a project, it always helps to have all of the items you need to finish before you start. A great lumber yard is the one stop place for most of the projects you may be working on.

The Francis Beidler Forest is situated in Four Holes Swamp near Charleston, SC. The swamp contains 1600 acres of old-growth forest including the world’s largest stand of virgin bald cypress trees, many of which are estimated to be 1000 years old.

Are you after a particular type of wood for your new shelves? A great lumber yard will have the right options for the project, and all of the hardware and other items you’ll need to finish quickly and easily.

It’s important to remember that most of the finished lumber available for sale may be thinner than what you really want for a particular project. While rough-cut lumber can require a bit more work to finish, it may provide the thickness you need.